FE-2100SD-3 Soft Magnetic DC Measuring Instrument

Profile information

The FE-2100SD-3 soft magnetic material DC magnetic performance test system is mainly used to measure various soft ferrite, pure iron, silicon steel, permalloy, amorphous and nanocrystalline ring samples or open-circuit bars under DC static conditions. The basic magnetization curve and hysteresis loop of the strip-shaped soft magnetic material can accurately measure the static magnetic characteristic parameters such as the initial permeability μi, the maximum permeability μm, the saturation magnetic induction intensity Bs, the remanence Br, and the coercive force Hc.

basic information

Detailed parameters

Excitation power supply	Output Power	350VA	500VA	1000VA
	Output range	±35V/10A	±50V/10A	±50V/20A
	Output current	0.01A,0.1A,1A,10A		0.02A,0.2A,2A,20A
	Power supply：220V±10%，50Hz Stability: 0.05% Resolution: 1uA/2uA Accuracy: 0.1%
数据采集控制模块	AD part Input voltage: ±5 volts. AD converter: 16-bit AD, speed 2000-20000 channels/sec. Channel input impedance: 1 Mohm. System accuracy: ±0.1% FSR. Noise (peak value): less than ±1LSB (typical, 500 sampling points) Typical AD conversion speed: USB1.1 interface: 200 calls/sec. 1-16 channels can be collected per call			DA part Two-way 16-bit DA converter. Output voltage: ±5 volts. Output voltage accuracy: ±0.1%, resolution 12 bits. Output voltage settling time: less than 100 microseconds. DA output speed: 2000-4000 times/sec (USB2.0 interface)
Electronic integrator	Power requirements: ±12V. Magnetic flux range: 0.25~0.5~1~2~2.5~5~10~20mwb. Resolution: 0.0001mWb. Accuracy: 0.5%. Drift: 0.001mWb/min

Instrument model		FE-2100SD	FE-2100SD1	FE-2100SD3
Instrument picture
Ring sample		√	√	√
Open circuit measurement	Solenoid	×	√	√
Open circuit measurement	B-type permeability meter	×	×	√
Test range		Ring sampleui,ur,Br,Hc,Hs,Bs	Round stick:ui,ur,Br,Hc,Hs,Bs	Bar, stick:Br,Hc,Hs,Bs
Sample requirements		According toGBT13012-2008 specification ring sample requires inner and outer diameter ratio≥0.8	Suitable for measuring ferromagnetic cylinders with aspect ratio greater than30	Suitable for testing ferromagnetic material strips and rods. The length of the test sample must be greater than100mm.
Test curve graph

版权

FE-2100SD-3 Soft Magnetic DC Measuring Instrument