MENU

版权

copyright：Hunan Forever Elegance Technology Co.,Ltd All Rights Reserved.  湘ICP备11007165号 

SERVICE

产品中心

FE-2100RB meter magnetic distribution measuring device (automatic version)

Profile information
The FE-2100RB meter magnetic distribution measuring device combines the actual needs of multi-pole magnetic ring manufacturers and motor enterprise users. After careful design of the test bench and precise control of the motor, it is an excellent product to accurately measure the surface magnetic field distribution. It is an indispensable tool for the correct evaluation of the magnetization accuracy of the magnet and the quality inspection of the magnetic ring.
Test reports such as XY coordinates, P polar coordinates, 3D magnetic field distribution, and harmonic analysis relative to the fundamental wave can be provided to provide accurate magnetic field distribution data for motor design. The high-concentricity design and the high-precision level of the probe return are the guarantee of the quality of the equipment, and the comprehensive performance of the product has reached the international advanced level.
basic information
Detailed parameters
Categories
Magnetic Field Scanner
heat:
number
- +
没有此类产品
Product Details
Product introduction
As people's demand for the quantity and quality of motors has been greatly improved, these have put forward higher requirements for the production of multi-pole magnetic rings. How to develop and produce high-quality multi-pole magnetic rings, how to identify the quality of multi-poles, and how to use magnetic rings to design high-quality motors all put forward higher requirements for the inspection of magnetic rings. In the past, the manual method of combining simple fixtures was far from being able to meet the requirements of use because of large errors, low accuracy, long time-consuming, and few inspection indicators. Yongyi Technology Co., Ltd. is focusing on these aspects, using computer control and data collection, and combining the actual needs of users to develop this system.
FE-2100RB surface magnetic distribution measuring deviceCombined with the actual needs of multi-pole magnetic ring manufacturers and motor enterprise users, the test bench body is carefully designed and the motor is precisely controlled to achieve the surface magnetic field distribution. Accurately measure excellent products. It is an indispensable tool for the correct evaluation of the magnetization accuracy of the magnet and the quality inspection of the magnetic ring.
Can provide test reports such as XY coordinates, P polar coordinates, 3D magnetic field distribution and harmonic analysis relative to the fundamental wave to provide accurate magnetic field distribution data for motor design. The high concentricity design and the high precision level of the probe return are the guarantee of the quality of the equipment, and the comprehensive performance of the product has reached the international advanced level.

 

Product features
● Powerful intuitive data analysis of three-dimensional magnetic field distribution waveform
● Fully automatic XYZ handheld probe displacement control
● The XYZ direction can be fine-tuned by the fine-tuning knob
● It can be detected more accurately from near the zero point of the magnetic pole
● The internal control of the single-chip microcomputer, the range can be designed arbitrarily
● Imported three-jaw chuck to ensure rotation concentricity better than 0.05mm
● The stepping motor table rotates smoothly, and the jitter is less than 0.03mm
● With automatic magnetic pole return to zero and comparison with the fundamental wave

 

Parameter
Software
Technical indicators
Measured parameter Test speed Rotation concentricity Probe movement accuracy Highest test points Gaussian measurement range
Number  value 30S~60S 0.05mm 0.01mm 36000 points

Seven automatic ranges
 
Rotating platform
● Rotational concentricity of three-jaw chuck: 0.01mm, overall concentricity is better than: 0.05mm
● Optical motorized translation stage, model: 01RS004 Optical motorized rotating platform, transformation ratio 1:180
● Three-jaw chuck imported from Taiwan, model: SE-03 type
● The highest number of test points for precision measurement is 36000 steps/revolution, and the test time can be adjusted from 30 to 60 seconds.
 
Measuring probe
● Four automatic ranges: 0.2k/0.4k/1k/2k/4k/10k/20kGs seven automatic ranges
● Resolution: Corresponding to 0.2% of the full scale of each file, below 400Gs, 0.1Gs valid
● Accuracy: Corresponding to 1.0% of full scale for each gear
● Distribution of a standard magnetic field, magnetic field 1000Gs±5Gs, calibration accuracy: 0.5%, used for magnetic field calibration
 
Measurement instructions
● Ordinary transverse probe: thickness 0.65mm, width: 3.5mm, protruding length of the front end: 60mm
● Inner ring measurement range: Φ10mm ~ Φ76mm, large samples need to add measurement tooling
● Outer ring measurement range: Φ6mm ~ Φ82mm, large samples need to add measurement tooling
● The travel distance of the probe in three directions: X axis: 200mm, Y axis: 200mm, Z axis: 100mm

 

Cartesian coordinate analysis chart
Polar coordinate analysis chart
Magnetic field harmonic analysis diagram
Three-dimensional distribution map of magnetic field
keywords
measuring
magnetic
quality
magnetic distribution measuring device
magnetic ring
magnetic distribution
On a
FE-2100RA Multi-pole magnetic ring distribution measuring device (manual version)
The next article
FE-2100RC spatial magnetic field distribution measuring instrument